For Turbocharger Based Gas Turbine Engines

Welcome fellow jet engine builders. This page will house all software releases and updates to aid in turbocharger based gas turbine engine design & construction. All programs are free of charge. These programs are designed as an aid in building. They are not perfect, but should give a fairly close estimate of their respective outputs.



NEW for 2010: Online version of JetSpecs Flame Tube Calculator

Click for full size
JetSpecs™ Designer 2.0
Latest Release: 2004 (Current through 2011)
Version: 2.0

Release notes: This is the LATEST version of this program. It combines both of the original two programs into ONE.

Description:
This program is designed to aid in the design and construction of the flame tube and combustor. You enter the inducer diameter (bent blades at top of compressor). It will provide very good estimates of flame tube size and number of holes & hole sizes required per zone (primary, secondary, and tertiary/dilution).

Also, this program is designed to aid in the analysis of the turbocharger based engine. See the screen shot to the left for all the features offered.

Download: JetSpecs.exe - 420kb NEWEST!

Click for full size
Combustor/Flame Tube Calculator
This feature is designed to aid in the design and construction of the flame tube and combustor. You enter the inducer diameter (bent blades at top of compressor). It will provide very good estimates of flame tube size and number of holes & hole sizes required per zone (primary, secondary, and tertiary/dilution).


Click for full size
Turbo Analysis
This feature is designed to aid in the analysis of the turbocharger based engine. See the screen shot to the left for all the features offered.


Special Thanks To The Following:

DIYGasTurbines